OPEN303W
User Guide
9
More Settings…
Field Definition
Tx Frame
The quantities for the wireless network card transmit.
(Frame: The unit of packet)
Rx Frame
The quantities for the wireless network card receive.
(Frame: The unit of packet)
Field Definition
Channel
The Channel will change automatically according to AP’s setting.
Tx Rate
Click the down arrow ▼ to select the Tx Rate from Auto, 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54
Mbps, you can select up to 54 Mbps.
SSID
The SSID is the unique name shared among all points in your wireless network. The name must be
identical for all devices and points attempting to connect to the same network.
Any
You may select to have SSID by choosing any, the SSID will be obtained automatically from
whichever Access Point with the optimal signal for this device. If any is left unchecked, it means you
will have to enter the SSID manually.
Field Definition
Network Type
The infrastructure is intended for the connection between wireless network cards and an
Access Point. With the wireless adaptor, you can connect wireless LAN to a wired global
network via an Access Point.
Equipped with the wireless adaptor, you can share files and printers between each
COMPUTER and laptop.
Encryption
You can only set your Security preference when Change is selected and then all fields are
active for change. To save settings, press Apply when you are done with the settings. Select
from the pull-down menu, there are four options including Disable, WEP, TKIP and AES.
Authentication
Mode
You can select the Authentication Mode from the pull-down men, including Auto, Open
System, Shared Key, WPA and WPA PSK.
Encryption
Setting
WEP Encryption Setting WPA Encryption Setting.
You can only set your Security preference when Change is selected and then all fields are
active for change. To save settings, press Apply when you are done with the settings.
WEP Encryption Setting
Key length. You may select the key length between 64 (bit), 128 (bit) and 256 (bit).
Field Definition
Default Key ID You can set your default key ID at #1~#4.
Key Format
Select Hexadecimal if you are using hexadecimal numbers (0-9, or A-F).
Select ASCII if you are using ASCII characters (case-sensitive).
10 hexadecimal digits or 5 ASCII characters are needed if 64-bit WEP is used; 26
hexadecimal digits
or
13 ASCII characters
are needed if
128-bitWEP
is usedP
58
hexadecimal digits or 29 ASCII characters are needed if 256-bitWEP is used.
Key Value
#1~#4 This setting is the configuration key used in accessing the wireless network via WEP
encryption. You can specify up to 4 different keys to encrypt or decrypt wireless data.
The Key is provided via 802.1x authentication
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals